Stopping the Spread of Mold in Florida Apartments
Mold is something no apartment renter enjoys dealing with. This obnoxious fungus can grow just about anywhere, and in humid states like Florida it can be a huge problem. Mold can create serious health issues if it’s left unchecked, so you have to get rid of it as soon as possible. You also need to take precautions to prevent the mold from growing back.
Read through this guide, and gain the knowledge you need to keep mold at bay.
Getting Rid of Mold
If you see that mold is starting to grow in your apartment, you need to get rid of it right away. To clean it, you should scrub it down with water and some bleach or detergent. Make sure you thoroughly dry the spot afterward to keep mold from growing back.
When dealing with mold, it would be wise to wear protective gear, like goggles and long gloves. Mold spores can be bad for your health, and you don’t want your skin to get exposed to them. If you have any type of mold allergy, it would be a good idea ask someone else to help you with this job.
By taking care of the mold early, you can avoid the hassle of bringing your landlord into the situation. Now that you know how to get rid of mold, here are some tips you can use to keep it from growing.
Improve Your Apartment’s Ventilation
One of the best ways to prevent mold from growing is to improve air circulation inside your apartment. Moisture is a key factor that helps mold grow, and mold growth is inevitable if humid air is stagnant in your unit. By circulating dry, fresh air through your apartment, you can regulate the internal temperature and combat mold growth.
When the air is dry outside, open some windows to let fresh air inside your apartment. To make it easier for the air to travel through your apartment, keep your doors opened. If your apartment comes with a ceiling fan, turn it on to create more circulation.
If your washer, dryer, and other appliances have vents that lead outside, check to make sure they are working properly. Any issues with the vents will keep moisture inside your apartment, which can bolster the spread of mold.
Fix Leaks & Damages ASAP
Leaks from pipes and other damaged equipment can also lead to mold. If you spot a leak, you should report it so your landlord can get a mechanic on the job. Typically, you can prevent mold growth by fixing a leak one or two days after it starts.
If you ignore the problem for too long, you will be at risk of dealing with a mold outbreak. Besides, leaks cause you to waste water, and you don’t want your water bill to increase behind your back.
Keep Humidity Levels in Check
Mold grows quickly in moist environments, so it would be wise to keep the humidity levels in your apartment low. The ideal range for humidity levels in apartment is somewhere between 30% and 50%. If you feel that your apartment is too humid, you should take some precautions to make the air drier.
A great device to have in your apartment is a dehumidifier. Dehumidifiers suck up the moist air around your unit, and remove the moisture it’s carrying. The clean air is then blown back out, leaving you with a less humid apartment. You just need to clean out the moisture from time to time to make sure the device operates properly.
You can also lower humidity levels by taking shorter showers each day. If you are up for it, try using colder water when you shower as well. Doing this will lower your electric bill in the process.
Other Tips for Mold Prevention
Here are some other tips that can help you reduce moisture and inhibit mold growth:
- When cooking, make sure you use a lid to keep the steam under control.
- Wipe up any spills right away.
- Shop for mold-resistant products and décor to use in your apartment.
- Buy a moisture meter to check humidity levels in each part of your unit.
Some of these tips can also help you conserve energy in your apartment. Want to learn more?